MORI SEIKI® Compatible Modular Subplates

Description

Mori Seiki compatible modular subplates

Tosa Tool builds OEM-fit modular fixture plates for legacy Mori Seiki Frontier-M, MV, SV, NV/NVD, DuraVertical and TV vertical machining centers. Current DMG MORI models (CMX, DMC, DMV, NVX) are on our DMG MORI page; horizontal machining centers, lathes and 5-axis machines are quoted on request. These plates are designed around your machine’s table so you can mount once and change setups with modular workholding — without re-tramming a vise every job.

A salute to Mori Seiki

Mori Seiki built machine tools in Japan for decades before its merger into DMG MORI. Thousands of its MV, SV, NV and DuraVertical machining centers are still cutting parts in shops across North America.

We’re proud to offer modular plates designed to fit these machines exactly.

Machine series & models in the configurator

Use the dropdowns above to select series → model → material. Mori Seiki options include:

• Frontier Series (1990s): Frontier-M
• MV Series (box way): MV-Junior / MV-40E, MV-40 / MV-40B, MV-50E, MV-55/40 / MV-55/50
• SV Series (box way): SV-500 / SV-50, SV-503
• NV / NVD Series: NV4000 DCG, NV5000 α1A / NVD5000 α1A, NV5000 α1B / NVD5000 α1B, NV6000 DCG
• DuraVertical Series: DuraVertical 5060, DuraVertical 5080, DuraVertical 5100
• TV Series (tapping / drilling): TV-30

Don’t see your model? Email us your model and table size.

If your Mori Seiki mill isn’t listed, we can still help — use the Custom Plate Builder or email your table size and model to dan@tosatool.com.

Add Options & built-to-fit accessories

Select your plate, then Add Options to your Modular Subplate and add built-to-fit hardware accessories. Available add-ons include:

• Keyway locating bores & pins
• Set screws and plugs
• Plate mounting kit (t-nuts and capscrews)
• TT 6″ modular vise
• 8″ modular angle plate
• 20-pc modular pin kit
• Tosa Tool modular full kit or half kit (with shipping)

That way the plate and the accessories that fit it travel together in one order.

Tosa Tool hole pattern (TT)

The TT standard hole pattern is two nestled 1.2500″ grids sharing the same plate:

• Precision bore grid: ø.5010″ ±.0002 TYP on 1.2500″ centers — for locating pins and accurate repeat setups
• Threaded hole grid: 1/2-13 UNC 2B thru TYP on 1.2500″ centers, with .5625 × .19 counterbore (~3/16″ deep) — for clamps, bolts, and modular accessories

The two patterns are offset so bores and threaded holes alternate; adjacent holes (bore next to thread) are on 1.2500″ centers, and holes of the same type repeat every 2.500″. Same pattern across Tosa Tool modular subplates so options and built-to-fit hardware accessories line up from plate to plate.

Material options

• PH — 4140 PreHard steel: excellent strength and durability for production workholding
• MC — medium-carbon steel: strong, long-life steel plate
• AL — 7075-T6 aluminum: light but strong; popular when weight and handling matter

Made to order in Wisconsin

These plates are MTO from TosaTool LLC.

Lead Time: Standard lead time is 6 to 10 weeks, depending on our material suppliers, current workload and the options you select. Need it sooner? Add RUSH service for 15% and we will do our best to get your order out the door as fast as possible, with overtime hours and expedited vendor service.

Complete the setup

After you select your plate, use Add Options to your Modular Subplate for built-to-fit hardware accessories — and check You May Also Like below for the modular vise, angle plates, and clamping kits that finish the TT-pattern setup.

Browse Mori Seiki compatible plates · Modular accessories · Custom Plate Builder · FAQ