AWEA® Compatible Modular Subplates

Description

AWEA compatible modular subplates

Tosa Tool builds OEM-fit modular fixture plates for AWEA AF-II, AF-MAX, BM-II and BM-MAX vertical machining centers and the AT-510 drill/tap center, plus round plates for the FCV-620 and FV 5-axis tables. Bridge, double-column, gantry, horizontal, pallet-changer and very large machines are quoted on request. These plates are designed around your machine’s table so you can mount once and change setups with modular workholding — without re-tramming a vise every job.

A salute to AWEA

AWEA Mechantronic builds machine tools in Taiwan as part of the Goodway Group. Its AF and BM vertical machining centers, from compact linear-way machines to heavy box-way models, run in job shops and production shops around the world.

We’re proud to offer modular plates designed to fit these machines exactly.

Machine series & models in the configurator

Use the dropdowns above to select series → model → material. AWEA options include:

• AF-II Series (linear way): AF-650II, AF-800II, AF-860II, AF-1000, AF-1060II, AF-1250II, AF-1400II, AF-1600II
• AF-MAX Series (800 Y): AF-1400MAX, AF-1600MAX, AF-1800MAX
• Older AF Models: AF-610, AF-1460
• BM-II Series (box way): BM-850II, BM-1020II, BM-1200II, BM-1400II, BM-1500II
• BM-MAX Series (box way, 800 Y): BM-1400MAX, BM-1600MAX, BM-1800MAX
• Drill / Tap Center: AT-510
• 5-Axis (round tables): FCV-620 (Ø650 table), FV-960 (Ø350 table), FV-560 (Ø220 table)

Don’t see your model? Email us your model and table size.

If your AWEA mill isn’t listed, we can still help — use the Custom Plate Builder or email your table size and model to dan@tosatool.com.

Add Options & built-to-fit accessories

Select your plate, then Add Options to your Modular Subplate and add built-to-fit hardware accessories. Available add-ons include:

• Keyway locating bores & pins
• Set screws and plugs
• Plate mounting kit (t-nuts and capscrews)
• TT 6″ modular vise
• 8″ modular angle plate
• 20-pc modular pin kit
• Tosa Tool modular full kit or half kit (with shipping)

That way the plate and the accessories that fit it travel together in one order.

Tosa Tool hole pattern (TT)

The TT standard hole pattern is two nestled 1.2500″ grids sharing the same plate:

• Precision bore grid: ø.5010″ ±.0002 TYP on 1.2500″ centers — for locating pins and accurate repeat setups
• Threaded hole grid: 1/2-13 UNC 2B thru TYP on 1.2500″ centers, with .5625 × .19 counterbore (~3/16″ deep) — for clamps, bolts, and modular accessories

The two patterns are offset so bores and threaded holes alternate; adjacent holes (bore next to thread) are on 1.2500″ centers, and holes of the same type repeat every 2.500″. Same pattern across Tosa Tool modular subplates so options and built-to-fit hardware accessories line up from plate to plate.

Material options

• PH — 4140 PreHard steel: excellent strength and durability for production workholding
• MC — medium-carbon steel: strong, long-life steel plate
• AL — 7075-T6 aluminum: light but strong; popular when weight and handling matter

Made to order in Wisconsin

These plates are MTO from TosaTool LLC.

Lead Time: Standard lead time is 6 to 10 weeks, depending on our material suppliers, current workload and the options you select. Need it sooner? Add RUSH service for 15% and we will do our best to get your order out the door as fast as possible, with overtime hours and expedited vendor service.

Complete the setup

After you select your plate, use Add Options to your Modular Subplate for built-to-fit hardware accessories — and check You May Also Like below for the modular vise, angle plates, and clamping kits that finish the TT-pattern setup.

Browse AWEA compatible plates · Modular accessories · Custom Plate Builder · FAQ