.562 Locating Screw — locate and bolt down fixturing on your Tosa Tool modular plate in one step. Works with Tosa Tool fixturing accessories. Location typically ±.0015″. Speeds setups vs separate dowels + screws. (pat. pend.)
Modular accessories for Tosa Tool fixture plates — clamps, locating pins, mounting hardware, modular vises, angle plates, and kits built to fit the TT hole pattern (two nestled 1.250″ grids).
Use these to speed setups, repeat jobs without re-tramming, and keep spare hardware on the shelf. Shop below, or start from an OEM modular subplate / the Custom Plate Builder.
- Locating pins, set screws & plugs, plate mounting kits
- TT 6″ modular vise and jaw accessories
- Modular angle plates for vertical work
- Clamping kits and modular full/half kits
Questions? Call 608-721-TOOL or email dan@tosatool.com.
TT6INMV – 6″ Modular Vise for Tosa Tool (and other 1.25″-grid) fixture plates. Grip with G-NOB low-profile clamps, parallels, or your existing 6″ Kurt®-style jaws. Over 5,000 lbf clamping force. Made in USA — in stock, ships today (standard 2-day).
- Sale!
Benchtop modular storage rack — the same bin rack Dan uses at the bench to keep standoffs, clamps, nuts, studs, and pins handy and organized. 15 removable bins (5 blue, 5 red, 5 yellow) on three sturdy shelves.
Cast iron modular angle plates (6″, 8″, 10″) with the full hole pattern of your Tosa Tool modular subplate. Mount for edge holes and vertical work. Ground flat and square better than .0005″ over 6″. Made to order — typically 2–4 week lead time.
Floating push-stop (kick stop / kicker) adds horizontal pressure or an adjustable stop anywhere on your modular plate. Lock the workpiece sideways or stop it in an awkward location. Comes with components as shown.
Floating stand-off puts support under the workpiece where screw/post stand-offs can’t — not only on available hole positions. Jack-stand screw with set-screw stop. All components as shown.
G-NOB and HD G-NOB — hardened tool-steel gripper buttons for low-profile clamping. “Get a grip, let ’er rip!” Rotate 1/8 turn for a fresh edge when dull. Kit: 1 G-NOB + 1 fastener. Used across Tosa Tool clamping products. (pat. pend.)
Hex stand-off kit for flat work that won’t fit a vise — aluminum and 1018CF steel, threaded and turned. 16 stand-offs total (4 of each style). (pat. pend.)
Hex standoffs (individual or kit) for flat work on modular plates — aluminum, 1018CF steel, and PETG options; threaded and post styles. ~3/4″ height leaves room for chips and taps. Jack stands help uneven work. (pat. pend.)
Locating pin kit & individual pins for Tosa Tool modular plates — pull-out dowels and screw-in locators, hard and ground to size. Order a kit or buy pins à la carte. Custom pins available on request.
Mini Mod TT105PH — 10″ × 5″ × .75″ 4140PH plate with hot black oxide. Hole pattern .75″ × .75″, 1/4″ dowels / 1/4-20 threads. Vise-pallet style for knife makers and small parts. In stock.
Modular 3D machining mount kit — mount a block from underside tapped holes and machine five sides in one setup. Forged 4140PH, black oxide. Suggest 2–4 kits. Hardware included.
