Description
Cincinnati Milacron compatible modular subplates
Tosa Tool builds OEM-fit modular fixture plates for Cincinnati Milacron and Cincinnati Machine Arrow, Arrow 2, E-Dart, Arrow ERD, Sabre, Lancer and Cintimatic 10VC vertical machining centers. Larger bridge machines, horizontals and pallet machines are quoted on request. These plates are designed around your machine’s table so you can mount once and change setups with modular workholding — without re-tramming a vise every job.
A salute to Cincinnati Milacron
From the Cintimatic 10VC of the 1980s to the Arrow, Sabre and Lancer machines of the 1990s and 2000s, Cincinnati Milacron and Cincinnati Machine vertical machining centers earned a reputation for being built to last.
We’re proud to offer modular plates designed to fit these machines exactly.
Machine series & models in the configurator
Use the dropdowns above to select series → model → material. Cincinnati Milacron options include:
- Arrow / Arrow 2 / E-Dart (ERM): Arrow 500 / Arrow 2 500 / Dart 500, Arrow 750 / Arrow 2 750 / Dart 750, Arrow 1000 / Arrow 2 1000, Arrow 1250C
- Arrow ERD (large): Arrow 1250 (ERD), Arrow 1500 (ERD)
- Sabre: Sabre 500, Sabre 750, Sabre 1000, Sabre 1250, Sabre 1500
- Lancer: Lancer 1250
- Cintimatic 10VC (1980s): 10VC-1000, 10VC-1250
Don’t see your model? Email us your model and table size.
If your Cincinnati mill isn’t listed, we can still help — use the Custom Plate Builder or email your table size and model to dan@tosatool.com.
Add Options & built-to-fit accessories
Select your plate, then Add Options to your Modular Subplate and add built-to-fit hardware accessories. Available add-ons include:
- Keyway locating bores & pins
- Set screws and plugs
- Plate mounting kit (t-nuts and capscrews)
- TT 6″ modular vise
- 8″ modular angle plate
- 20-pc modular pin kit
- Tosa Tool modular full kit or half kit (with shipping)
That way the plate and the accessories that fit it travel together in one order.
Tosa Tool hole pattern (TT)
The TT standard hole pattern is two nestled 1.2500″ grids sharing the same plate:
- Precision bore grid: ø.5010″ ±.0002 TYP on 1.2500″ centers — for locating pins and accurate repeat setups
- Threaded hole grid: 1/2-13 UNC 2B thru TYP on 1.2500″ centers, with .5625 × .19 counterbore (~3/16″ deep) — for clamps, bolts, and modular accessories
The two patterns are offset so bores and threaded holes alternate; neighboring holes (bore next to thread) fall on 0.625″ centers. Same pattern across Tosa Tool modular subplates so options and built-to-fit hardware accessories line up from plate to plate.
Material options
- PH — 4140 PreHard steel: excellent strength and durability for production workholding
- MC — medium-carbon steel: strong, long-life steel plate
- AL — 7075-T6 aluminum: light but strong; popular when weight and handling matter
Made to order in Wisconsin
These plates are MTO from TosaTool LLC.
Lead Time: Standard lead time is 6 to 10 weeks, depending on our material suppliers, current workload and the options you select. Need it sooner? Add RUSH service for 15% and we will do our best to get your order out the door as fast as possible, with overtime hours and expedited vendor service.
Complete the setup
After you select your plate, use Add Options to your Modular Subplate for built-to-fit hardware accessories — and check You May Also Like below for the modular vise, angle plates, and clamping kits that finish the TT-pattern setup.
Browse Cincinnati compatible plates · Modular accessories · Custom Plate Builder · FAQ
Reviews
There are no reviews yet.